 |
 |
|||
 |
||||
| home products stepper motors gear box, encoder and brake for STÖGRA stepper motors | ||||
| Gear box for STÖGRA stepper motors | ||||
| standard gear box series PE | ||||
| Gear box series PE includes 1-stage to 3-stages planetary
gear boxes, with ratios from 1:1 until 512:1. These gear boxes our mounted directly to the motor. A pitch, which makes part of the first planetary stage of the gear box, is mounted via drilling and a key to the motor shaft. The gear head is mounted on top of the pitch. The technical advantages of that system are • smaller gear box length • much smaller inertia of the pitch compared to a standard gear box coupling – results in better dynmical performance (higher acceleration possible) • 100% safe against slipping between motor shaft and gear box |
||||
 |
gear box series PE 56 | |||
|
gear box series PE 87/PE 88 | |||
|
gear box series PE 107 | |||
| Options for gear box | ||||
| Gear box series PE with special coating Z119 (together with mounted stepper motor) | ||||
| • Ordering example: SM 87.2.18M6 PE40 Z119 | ||||
| Gear box series PE with protection class IP65. The gear box is especially sealed, and gear box output shaft and keyway are made of stainless steel. |
||||
| Gear box series WPE with angled gear box High precision gear box series PLN with very low backlash from 3 to 5 angular minutes Detailed informations for gear box series WPE and PLN are available on request |
||||
Download |
||||
planetary gear box for stepper motors series SM 56 to SM 107 – data
sheet (123 KByte) |
||||
|
stepper
motors catalogue 2016 – Catalogue (850 KByte) |
||||
| stepper motors I position controls I power amplifiers I equipment I home I info@stoegra.de | ||||